LABELS DESIGNED FOR INDUSTRIAL USE
From 6mm to 36mm, our industry-leading labels are tested to the extreme to meet the demands of your profession.
Choose from:
- TZe tapes with durable laminated technology.
- Strong adhesive tapes with 50% more strength
to stay intact in the most demanding environments. - High-grade, , Flexible ID tapes that can
wrap securely around wires and cables. - Heat shrink tubes for clear cable identification.
WHY ARE BROTHER LABEL PRINTERS ESSENTIAL
FOR NETWORK INFRASTRUCTURE AND CABLES IDENTIFICATION
Quick identification
Clearly labelled
cables, equipment, and
patch panels for quick identification.
Compliance
Comply with ANSI/TIA-606C
or other standards that
require the use of
durable
and long-life identification labels.
Speedy maintenance
Maintenance and testing
were made faster, all thanks to the
clearly labelled cables and equipment.
Aids troubleshooting
Easily locate faulty
equipment and cables to ensure
immediate repair and minimum downtime.
EXTRA STRONG ADHESIVE TAPES FOR
USE ON ROUGH AND SMOOTH SURFACES
Independent laboratory tests showed that Brother’s Strong adhesive (TZe-S series) tapes adhered three times better on the average on rough surfaces than standard Brother’s TZe tapes. Ideal for electricians and network infrastructure installers who require long-lasting labels.
Use extra strong adhesive tape on smooth or rough surfaces such as:
and patch panels
cabinets and panels
TAPES FOR CABLE MARKING
Brother recognises the importance of correct and reliable cable and wire identification. That is why we developed four different types of tapes for cable marking.
Flexible ID Tape (TZe-FX series)
Developed for electricians, network infrastructure, panel builders, and other industries that require a reliable identification solution, Flexible ID tape can be used to mark cylindrical-shaped items, whereas other standard tapes may peel over time.
- For wrapping around cables with a diameter of 3mm or more.
- Use as a flag label around cables with a diameter of 3mm or more.
Self-Laminating Tape (TZe-SL series)
The protective overlaminate was applied to the whole label at the time of printing. It can wrap around CAT5E and even the thicker CAT6A network cables, providing extra protection for the text on the label.
- Use 24mm label width for cables with a diameter of 3mm to 6.6mm.
- Use 36mm label width for cables with a diameter of 3mm to 10.4mm.
Die-cut Flag Tape (FLe series)
Suitable for cables with small diameter and ideal for fibre optic cable identification in the network industry. The label is pre-cut and once printed, the long "tail" can be placed around the cable and the label can simply folded over the tail to lock the label into position.
- For cables with a diameter of 2.0mm to 8.0mm.
- Die-cut Flag Tape (FLe series) is applicable for
PT-E800T, PT-E850TKW, PT-P900W, and PT-P950NW only.
Heat Shrink Tube (HSe series)
This non-adhesive marker is made of a special material that is stored in the tape cassette as a flat tube. Once printed, the tube is opened up and passed over a cable or terminating connector. After heating, the tube will shrink to about half its original width, taking the shape of the cable or connector.
- For identification of cables and terminating connectors.
CONTACT OUR LABELLING EXPERTS TODAY!